PABCO® IMPACT RESISTANT
Key Benefits
-
Type X gypsum panel incorporating a high-density core that provides superior resistance to impact
-
Incorporates MOLD CURB® Plus technology for mold and moisture resistance
-
Designed for interior wall assemblies where surface durability, including abrasion and indentation resistance is the primary consideration
-
For use on high traffic interior walls such as schools, hospitals, prisons, and courtrooms for new or renovation projects
Product Description : Gypsum Panel providing superior resistance to impact
PABCO Impact Resistant is a true super panel protecting against abrasion, indentation, impact, fire, mold, and moisture. This panel is designed and tested for use in high traffic areas for both new and retrofit construction. PABCO Impact Resistant is manufactured with a proprietary high–density, Type X core that incorporates an embedded fiberglass mesh to further enhance impact resistance. The core is encased in 100% recycled heavy mold and moisture-resistant paper facing and backing.
Additional Resources
Product Dimensions
| TYPE | UL CORE | THICKNESS | WIDTH | LENGTH | EDGE | WEIGHT |
|---|---|---|---|---|---|---|
| PABCO® Impact Resistant Type X | PG-5W | 5/8" | 48" | 12' | Tapered | 2.9 lbs/ft2 |
1Length availability may change; other lengths may be available on a special-order basis. Consult with your local PABCO® representative.
2Represents approximate weight for design and shipping purposes. A more exact weight may be available for your area; consult with your local PABCO® representative.
Technical Data
| Composition | Core: Naturally occurring gypsum and proprietary additives Paper: 100% recycled heavy mold/mildew/moisture and abrasion-resistant paper on front, back and long edges |
|---|---|
| Manufactured | ASTM C1396 ASTM C1629 |
| Installation | GA-216 Application and Finishing of Gypsum Panel Products GA-214 Levels of Finish for Gypsum Panel Products ASTM C840 Standard Specification for Application and Finishing of Gypsum Board |
| Surface Abrasion Resistance | ASTM C4977 Classification Level 2 |
| Indentation Resistance | ASTM C5420 Classification Level 1 |
| Soft Body Impact Resistance | ASTM E695 Classification Level 3 |
| Hard Body Impact Resistance | ASTM C1629 Classification Level 3 |
| Mold/Mildew Resistance | ASTM D3273 10 (Highest Rating) |
| Water Absorption | ASTM C473 ≤5% by weight |
| Surface Burn | ASTM E84 Flame Spread 15 Smoke Developed 0 |
| Combustibility | ASTM E136 Non-Combustible Gypsum Core |
| Fire Resistance and Sound Control: | The PABCO® Sound Design Guide Sound Assembly Tool GA-600 Fire Resistance and Sound Control Design Manual Underwriters Laboratories - UL Product iQ® CKNX R7094 for the latest UL Design Numbers |
Product Documents
Technical
-
3-Part Spec–092900–Gypsum Panels
3-Part Specification for all PABCO® Gypsum and QuietRock ® gypsum panel products.
-
PABCO® Impact Resistant Submittal
Submittal document for PABCO Impact Resistant, a Type X gypsum panel that provides superior resistance to abrasion and surface indention.
Literature
Wallboard Guidelines
-
5/8” Type X Gypsum Wallboard Standards, Testing, and Certification
Document clarifies the meanings of the terms and cautions concerning the ratings of fire-resistive gypsum board systems.
-
GA-214-2021 Levels of Finish for Gypsum Panel Products
The finishing requirements for walls and ceilings prior to the application of paints and other decorative finishes.
-
GA-214-2022 Quick Reference Guide
Quick reference guide to the recommended levels of finish for gypsum panel products.
Sustainability
-
HPD – MOLD CURB® Plus
HPD v2.2 for 5/8” MOLD CURB Plus Type X.
-
Raw Materials–MOLD CURB® Plus
Disclosure and Optimization–Sourcing of Raw Materials for 5/8” MOLD CURB® Plus Type X.
-
VOC – MOLD CURB® Plus Products
VOC Emission Test Certificate for 5/8” MOLD CURB® Plus, which also applies to other products formulated to provide mold and…
