PABCO LITECORE®
Key Benefits
-
Lightweight drywall for use on residential walls and ceilings
-
Sag-resistant, with a proprietary noncombustible, dimensionally stable gypsum core
-
Can be used on both walls and ceilings eliminating the need to source two different products for your project
-
For interior non-structural, non-fire-resistance rated applications in new or renovation construction
-
May be formed to a curve with a short radius, and used as a covering material for flat or curved surfaces
Product Description : Lightweight panel for walls and ceilings
LITECORE is an interior sag-resistant gypsum panel with a proprietary noncombustible, dimensionally stable gypsum core formulated to be lighter than regular wallboard. The product is intended for use in non-structural, non-fire-resistance rated wall and ceiling applications where framing is spaced not more than 24 inches on center. This dual-purpose panel can be used on both walls and ceiling eliminating the need to source separate products. Each panel is encased in 100% recycled paper on the face and back. It can be used for both new construction and renovation projects.
Additional Resources
Product Dimensions
| TYPE | UL CORE | THICKNESS | WIDTH | LENGTH | EDGE | WEIGHT |
|---|---|---|---|---|---|---|
| PABCO LITECORE® | N/A | 1/2" | 48" | 8'-12' | Tapered | 1.4 lbs/ft2 |
| PABCO LITECORE® | N/A | 1/2" | 54" | 12' | Tapered | 1.6 lbs/ft2 |
1Length availability may change; other lengths may be available on a special-order basis. Consult with your local PABCO® representative.
2Represents approximate weight for design and shipping purposes. A more exact weight may be available for your area; consult with your local PABCO® representative.
Technical Data
| Composition | Core: Naturally occurring gypsum and proprietary additives Paper: 100% recycled paper on front, back and long edges |
|---|---|
| Manufactured | ASTM C1396 |
| Installation and Finishing | GA-216 Application and Finishing of Gypsum Panel Products GA-214 - Levels of Finish for Gypsum Panel Products ASTM C840 Standard Specification for Application and Finishing of Gypsum Board |
| Surface Burn | ASTM E84 Flame Spread 15 |
| Combustibility | ASTM E136 Non-Combustible Gypsum Core |
| Sound Control | The PABCO® Sound Design Guide Sound Design Tool |
Product Documents
Technical
-
3-Part Spec–092900–Gypsum Panels
3-Part Specification for all PABCO® Gypsum and QuietRock ® gypsum panel products.
-
Safety Data Sheet – PABCO® Gypsum Panel Products
Safety Data Sheet for all PABCO Gypsum board products.
-
PABCO LITECORE® Submittal
Submittal document for PABCO LITECORE, a lightweight gypsum panel for walls and ceilings.
Literature
Wallboard Guidelines
-
GA-214-2021 Levels of Finish for Gypsum Panel Products
The finishing requirements for walls and ceilings prior to the application of paints and other decorative finishes.
-
GA-214-2022 Quick Reference Guide
Quick reference guide to the recommended levels of finish for gypsum panel products.
-
GA-226-2019 Application of Gypsum Board to Form Curved Surfaces
Describes the special application methods used to install gypsum board on curved wall or ceiling surfaces.
Sustainability
-
HPD – PABCO 1/2″ Gypsum Panels
HPD v2.2 for 1/2″ PABCO Regular, Interior Ceiling, and LITECORE®.
-
Raw Materials–PABCO® 1/2” Gypsum Panels
Disclosure and Optimization–Sourcing of Raw Materials for 1/2” PABCO® Regular, Interior Ceiling, and LITECORE®.
-
VOC – PABCO® Regular Products
VOC Emission Test Certificate for 1/2” PABCO® Regular, 1/2″ LITECORE®, and PABCO® Flex gypsum board products.
